AZ1630840014 Heater Motor With 2 Impellers 24V

The AZ1630840014 heater motor is a key part for the heating system in HOWO series vehicles. Its main job is to push air for the heater. It turns electricity into movement to spin the impellers, which blow warm air into the car. This warms up the inside fast, so driving is more comfortable when it's cold.

This heater motor's ports and size match the original HOWO heating system. You can directly replace old or broken ones-no need to change the car's original wires or where it's mounted. It has 2 impellers, so there's enough air flow. The 24V voltage works perfectly with HOWO's electrical system, so it runs steadily and well after you install it.

① Fits Original HOWO: Follows HOWO's original specs. The 24V voltage and 2 impellers meet exactly what the heating system needs for air.
② Easy Direct Replacement: Matches the original car's ports and mounting spots. No extra work needed, which saves repair time and labor costs.
③ Steady Air Flow: With 2 impellers, it pushes more air and spreads it evenly-so the car warms up fast and evenly.
④ Reliable: Uses good materials for the motor's inner parts and tough impellers. It works well in cold weather, has stable electrical performance, and doesn't break easily even with long use.

Only made for HOWO series vehicles-it works fully with their original heating systems. Don't use it on non-HOWO cars or other models from the same brand (like non-HOWO commercial vans or passenger cars). Different cars have different electrical voltages, heating system setups, and sizes. Using the wrong motor might break the heating system or the motor itself.

- Product Model: AZ1630840014
- Applicable Vehicles: HOWO series vehicles
- Function: Spins impellers to push air for the car's heater, helping warm the inside
- Core Setup: 2 impellers; 24V rated voltage
- How to Install: Replace directly in the original spot (matches the car's original wire ports and mounting holes)
- Material: Motor case (plastic that resists high heat + metal); Impellers (tough engineering plastic); Inner wires (good copper wire)
- Working Environment: Works in cold to normal temperature inside the car (-30℃~60℃); Handles small vibrations and dust (good for driving situations)

Q1: Can I use this AZ1630840014 heater motor on a non-HOWO car?
A1: No. This motor's 24V voltage, size, and ports are made for HOWO series cars. Non-HOWO cars might have different electrical systems or heating setups-so it won't fit or work right.

Q2: After installing, the motor runs but doesn't push much air. Why?
A2: First, check if the 2 impellers are put in right-make sure they're not backwards or loose. If the impellers are okay, check if the heater's air tubes are blocked by dust or dirt. Cleaning the tubes usually fixes the low air flow.

Q3: The motor doesn't run when I turn it on. How to check?
A3: First, use a multimeter to see if the voltage going in is 24V (to rule out car electrical problems). If the voltage is good, the motor's inner coil might be burnt or the wire connector is loose. Check the wires or replace the motor with a new one.

Q4: Does this heater motor last as long as the original HOWO one?
A4: Yes. It uses the same key parts (2 impellers, 24V) and good materials as the original HOWO heater motor. It lasts just as long, so it works reliably for a long time.

Hot Tags: az1630840014 heater motor with 2 impellers 24v, China az1630840014 heater motor with 2 impellers 24v manufacturers, suppliers, factory