Technical Specifications
：
Part Number: 614150004
Compatible Models: WD615, WP10 truck engines
Function: Seals oil pan and engine block; stops oil leaks
Material: Nitrile rubber (NBR) + stainless steel core
Manufacturing Process: Stainless steel stamping + rubber vulcanization
Fuel Savings: Up to 3% less fuel use (thanks to stable oil pressure)
Service Life: Up to 150,000 km / 4 years (regular use)
Operating Temp: -20°C to 120°C
Weight: 0.2 kg (same as factory part)
Installation Note: Clean mounting surfaces first; torque bolts to manufacturer's standard (don't over-tighten)
Working Condition: Handles engine oil, high temps, vibration-great for heavy-duty hauling
614150004 is an oil pan gasket for WD615 and WP10 truck engines-total must-have.
It seals the gap between oil pan and engine block, stops engine oil from leaking out.
No good gasket? Oil drips everywhere, engine runs low on oil, overheats fast, and ruins pricey parts like bearings or pistons-total hassle to fix.
Fits WD615 and WP10 engines perfect-same size and shape as original, no trimming, no mods, just swap it out. It's made of nitrile rubber (NBR) with a stainless steel core.
NBR is oil-resistant, flexible, takes high engine temps without cracking.
The steel core is stamped to shape, then bonded to rubber via vulcanization-no separation, no warping, even with constant engine vibration.
The edge is precision-molded too, fits oil pan and block like a glove-no gaps for oil to seep through.
This gasket keeps oil sealed tight, so engine stays at optimal oil pressure.
That means engine doesn't work extra hard, saves you up to 3% on fuel over time.
Lasts up to 150,000 km or 4 years of regular use-way better than cheap rubber gaskets that crack after 50,000 km.
Quick tip: Clean oil pan and engine block surfaces before installing-no oil or dirt left.
Don't over-tighten the bolts either-squeezes gasket too hard and causes leaks.
Every gasket gets pressure-tested before shipping-no weak spots, no leaks.
Key Features：
No oil leaks: NBR rubber + stainless steel core, precision edge-seals tight, no gaps
Tough: Resists high temps and engine vibration, no warping or separation
Saves fuel: Stable oil pressure cuts fuel use by up to 3%
Long-lasting: Up to 150,000 km or 4 years of regular use
Perfect fit: Matches original specs-no trimming, just bolt on
Oil-resistant: NBR rubber doesn't swell or crack from engine oil
Application ：
Only fits WD615 and WP10 truck engines using part number 614150004.
Before buying, double-check your engine model and original gasket part number.
Don't guess-wrong size won't seal, you'll keep leaking oil, waste time and cash.
Maintenance Recommendations
To keep this gasket (and engine) good:
Check for oil leaks every 10,000 km-tighten oil pan bolts if you see drips, replace gasket if leaks keep happening
Don't use harsh cleaners on the gasket-rips or damages the rubber
Change engine oil on schedule (every 5,000–7,000 km)-old oil breaks down rubber fast
Inspect gasket if you remove the oil pan-replace it if it's hardened or cracked
Quality Assurance ：
Every 614150004 gasket gets three checks before shipping: first, material test (NBR rubber and stainless steel meet standards); then pressure test (no leaks under engine oil pressure); finally, fit test (matches WD615/WP10 original dimensions).
As reliable as factory part-trust it to keep engine oil sealed tight, save fuel, avoid costly repairs.
Why choose us?
Zoya Auto Parts: Your one-stop solution for all parts needs.
Zoya Auto Parts is your most loyal partner, ensuring quality through every challenge.
Zoya Auto Parts: Equipping your trucks with reliable armor for unmatched road performance.
Zoya Auto Parts: Building a large, inclusive company for everyone.
Hot Tags: 614150004 oil pan gasket, China 614150004 oil pan gasket manufacturers, suppliers, factory
