Clutch Master Cylinder 1602110-367 For FAW

Clutch Master Cylinder 1602110-367 For FAW

The 1602110-367 Clutch Master Cylinder is a key executive part for FAW heavy-duty trucks’ clutch systems (tractor, cargo, dump trucks). It turns the mechanical force from the clutch pedal into hydraulic pressure, sending it to the slave cylinder to control clutch separation and engagement.
Send Inquiry
Description
Technical Parameters

Product Description

 

 

The 1602110-367 Clutch Master Cylinder is a key executive part for FAW heavy-duty trucks' clutch systems (tractor, cargo, dump trucks). It turns the mechanical force from the clutch pedal into hydraulic pressure, sending it to the slave cylinder to control clutch separation and engagement. This ensures smooth gear shifting, stable power transmission, and reliable driving-super important for safety and operational efficiency. We use good materials and precise manufacturing to make it: the cylinder body is high-strength aluminum alloy-lightweight and corrosion-proof. The piston is high-wear-resistant engineering plastic-oil-resistant and anti-aging. The sealing ring is imported fluorine rubber-oil-tight and leak-proof. The installation interface, bolt specs, and push rod stroke fit the original FAW clutch system (J6P/J6L/J7 models) exactly, so it installs with no mods. It handles tough conditions-120℃ engine compartment heat, 5-500Hz vibration, and oil/chemical erosion-without cylinder deformation, piston wear, or sealing leaks. Swapping it is easy: no need to adjust the hydraulic pipeline or pedal, just disconnect the old cylinder's oil pipe, take off the bolts, install the new cylinder, connect the oil pipe, bleed air, and test the clutch. Before shipping, we test 'em strict: check oil tightness (no leaks at 1.5MPa), pressure output (≥8MPa), and durability-so it's reliable.

 

Products Photo

 

 

 

1602110-367 for FAWClutch Master Cylinder 1602110-367 for FAW 2

Clutch Master Cylinder 1602110-367Clutch Master Cylinder

 

Technical Parameters

 

 

Product Model: 1602110-367

Applicable vehicles: FAW J6P/J6L/J7 (original FAW clutch system)

Type: Clutch master cylinder (aluminum alloy cylinder + engineering plastic piston + fluorine rubber seal)

Function: Convert mechanical force to hydraulic pressure, control clutch operation, ensure smooth gear shifting

Material: Cylinder (high-strength aluminum alloy, anodized); piston (high-wear-resistant engineering plastic); seal (imported fluorine rubber)

Installation: Direct replacement-fits original clutch interface and bolt specs

Working conditions: -30℃~120℃; 0.8-1.5MPa hydraulic pressure; ≥8MPa output pressure; ≥350,000 km life

 

Advantages

 

 

①Stable hydraulic pressure: High-strength aluminum alloy cylinder + optimized oil circuit provide sufficient pressure, ensuring smooth clutch operation. Operational efficiency 25% higher than ordinary clutch master cylinders.

② Sensitive response: Smooth cylinder inner wall + low-friction piston reduce resistance, responding to pedal operations in ≤0.2 seconds.

③ Perfect for FAW: Made to FAW's original clutch design-installation interface, bolt spacing, push rod length match. No adapters or pedal adjustments needed-saves 35% maintenance time vs universal clutch master cylinders.

④ Durable & reliable: Anodized aluminum alloy cylinder resists rust/corrosion, imported fluorine rubber seal keeps oil tight. Works stably in extreme temps and harsh roads-lasts 350k+ km.

 

Usage

 

 

This Clutch Master Cylinder (Model: 1602110-367) is only for FAW heavy-duty trucks-J6P, J6L, J7 models with original FAW clutch systems. It won't work on FAW with modified clutches or other brands (HOWO, Dongfeng Tianlong). Those have different clutch structures, interfaces, or hydraulic pressure needs-this clutch master cylinder won't fit or work.

 

FAQ

 

 

Q1: Works on FAW with modified clutch systems?

A1: No-modified clutches have different structures/hydraulic pressure needs. It causes mismatched installation or unsmooth gear shifting, leading to safety hazards. Get the clutch master cylinder for modified FAW clutches instead.

 

Q2: Clutch pedal hard or gear shifting unsmooth after new cylinder install?

A2: First check oil pipe (no leaks/blockage). If good, check push rod alignment with pedal (no misalignment/gap). If aligned, check hydraulic oil (sufficient and clean). Still having issues? Replace the cylinder (rare defect).

 

Q3: How to maintain the clutch master cylinder?

A3: 1. Check oil pipe and seal for leaks every 20k km (replace if damaged); 2. Replace hydraulic oil every 60k km; 3. Clean cylinder surface/push rod during maintenance-replace cylinder if push rod is deformed or inner wall worn.

 

Q4: Need to replace clutch slave cylinder with new clutch master cylinder?

A4: Not mandatory but recommended. New master cylinder works best with well-maintained slave cylinder-old ones affect clutch performance. Inspect slave cylinder and replace if faulty for safety.

 

WHY CHOOSE US

 

Zoya Auto Parts: One-stop sourcing to solve all your spare parts needs.

Zoya Auto Parts: Your most loyal partner. We understand your challenges and provide quality products to shield you from difficulties.

Zoya Auto Parts: Equip your truck with strong armor and ensure victory on the transportation battlefield.

Zoya Auto Parts: Building a big company for everyone.

 

Hot Tags: clutch master cylinder 1602110-367 for faw, China clutch master cylinder 1602110-367 for faw manufacturers, suppliers, factory