Product Description
The DZ93189360061 F3000 Hand Brake Valve is a key control part for F3000 heavy-duty trucks' braking systems (cargo, dump, tractor trucks). It controls the hand brake to keep the truck parked safely, stopping it from sliding on slopes or flats. It also helps the service brake in emergencies, making braking safer.
We use good materials and precise manufacturing to make it: the valve body is high-strength 6061 aluminum alloy-light and anti-corrosive. The internal sealing ring is imported fluororubber-resists high temperatures and wear. The valve core is precision-ground-runs smoothly with little friction. The installation interface, air pipe specs, and size fit the original F3000 braking system exactly, so it installs with no mods. It handles tough conditions-130℃ heat under the truck, 3-400Hz vibration, and rain-without the valve cracking, sealing ring aging, or valve core jamming. Swapping it is easy: no need to change the braking pipeline, just disconnect the old valve's air pipe, take off the bolts, install the new valve, connect the air pipe, and test braking. Before shipping, we test 'em strict: check air tightness (no leaks at 0.8MPa), sensitivity, and high-temp resistance-so it's reliable.
Features And Advantages
Steady braking: Imported fluororubber seal + precision valve core-no air leaks, quick response. Brake failure rate 95% lower than ordinary valves.
Light & tough: 6061 aluminum alloy valve body is light, cuts vehicle weight, and resists corrosion from rain and road salt.
Perfect for F3000: Made to F3000's original braking design-installation interface, air pipe holes, bolt spacing match. No adapters or pipeline changes needed-saves 30% maintenance time vs universal valves.
Heat & wear resistant: Imported fluororubber seal handles 150℃ and wears little, lasting over 4 years. Precision valve core reduces friction-valve lasts 300k+ km.
Application Scope
This Hand Brake Valve (Model: DZ93189360061) is only for F3000 heavy-duty trucks-cargo, dump, tractor trucks with original F3000 braking systems. It won't work on F3000 with modified brakes or other brands (Shaanxi Auto DeLong, FAW Jiefang). Those have different brake structures, interfaces, or air pipe specs-this valve won't fit or work.
Basic Parameters
Product Model: DZ93189360061
Applicable vehicles: F3000 cargo/dump/tractor trucks (original F3000 braking system)
Type: Hand brake valve (aluminum alloy + imported fluororubber seal)
Function: Control the parking brake, assist the emergency brake, and stop sliding
Material: Valve body (6061 aluminum alloy, anti-corrosive); seal (imported fluororubber); valve core (precision ground)
Installation: Direct replacement-fits original brake interface, air pipe
Working conditions: 0.6-0.8MPa air pressure; -40℃~130℃; ≥300,000 km life
FAQ
Q1: Works on F3000 with modified brakes?
A1: No-modified brakes have different structures/specs. It won't match, causing leaks or brake failure. Get the valve for modified F3000 brakes instead.
Q2: Hand brake not working after new valve install?
A2: First check the air pipe connection (no wrong/disconnected pipes). If good, check for a stuck valve core (foreign matter). If the core is fine, check the air pressure (needs 0.6-0.8MPa). Still not working? Replace the valve (rare defect).
Q3: How to maintain the hand brake valve?
A3: 1. Check air pipes for leaks every 15k km (fix/replace if leaking); 2. Inspect seal for damage every 40k km (replace if bad); 3. Clean the valve body often to avoid corrosion.
Q4: Need to replace the air pipe with a new valve?
A4: No, but if the old pipe is aged/cracked, replace it. Bad pipes hurt braking effect and cause safety risks.
Hot Tags: dz93189360061 f3000 hand brake valve, China dz93189360061 f3000 hand brake valve manufacturers, suppliers, factory
