1000714569 Turbocharger

1000714569 is a high-performance turbocharger for heavy-duty diesel engines, paired mainly with Shaanxi WD615/WD618 series and SINOTRUK Steyr platform engines. It harnesses exhaust gas momentum to drive the turbine rotor, spinning the compressor impeller to compress intake air-boosting combustion chamber air density, optimizing fuel burn, increasing power by 25%-30% and cutting fuel consumption by 8%-12%. Its water-cooled bearing housing tolerates 850℃ exhaust temps and 120,000r/min max rotor speed, delivering stable power for heavy-load, mountain-climbing and long-haul work while meeting emission rules.

①Applicable Vehicles: Shaanxi Delong F3000/X3000/New M3000, Aolong; SINOTRUK HOWO, Steyr, Hoahan; heavy trucks, engineering vehicles and generators with WD615/WD618 diesel engines.

②Adaptable System: Fits original intake/exhaust systems, aligning with cylinder heads, manifolds and intercoolers. Works with original ECU without extra calibration.

③OE Reference Number: 1000714569

④Interchangeability: Matches original installation dimensions, flanges and connection standards. Ports align perfectly for direct replacement without modifying brackets, pipelines or wiring.

⑤Value-added Service: Verifies fit via VIN, engine model and displacement. Provides pre-installation cleaning tips and post-commissioning advice to avoid oil contamination faults.

Rated Boost Pressure: 0.7-0.9MPa (stable under standard conditions)

Max Rotor Speed: 120,000r/min

Turbo Inlet Temperature: ≤850℃ (endures extreme exhaust heat long-term)

Cooling Method: Water-cooled bearing housing + air-cooled turbine housing

Compressor Impeller Diameter: 62mm

Turbine Wheel Diameter: 68mm

Oil Requirement: CD 15W-40 engine oil, operating pressure 0.2-0.5MPa

Installation: Bolted to exhaust manifold, flange connection for airtightness

Dimensions: 380mm×220mm×200mm (L×W×H)

Weight: 14.8kg (excludes oil pipes/accessories)

Turbine Housing Material: Heat-resistant cast steel (HT300)

Compressor Impeller Material: Titanium alloy

Core Materials

Turbine housing: HT300 heat-resistant cast steel (850℃ tolerance, oxidation and thermal shock resistance). Compressor impeller: titanium alloy (lightweight, high-strength, fatigue-resistant). Turbine shaft: 42CrMo alloy steel (quenched-tempered for toughness). Bearing housing: high-strength aluminum alloy with integrated water cooling. Precision floating bearings rely on engine oil for high-speed stability.

Surface Treatment

Turbine housing: high-temperature ceramic coating (reduces heat radiation). Compressor housing: anodized (corrosion/scratch-resistant). Turbine shaft: nitrided (enhanced hardness). Flanges: precision-machined with high-temp sealant. Fasteners: high-temp stainless steel (anti-loosening, anti-rusting).

Production Craftsmanship

Impellers: precision forged + CNC machined (dimensional accuracy, dynamic balance). Shaft-impeller: integral forging (stability, low vibration). Bearing housing: precision-cast (smooth cooling flow). Assembly: precision positioning (rotor concentricity, ≤2g·cm balance). Delivery tests: vacuum leak detection, high-speed rotation and boost verification.

Production Capacity

Our line has CNC centers, precision forging equipment and high-temp test benches, monthly output ≥8,000 units. We fulfill bulk orders, offer flexible stock and cater to distributors, workshops and manufacturers.

①Quality Grade: OE-matching, compliant with Shaanxi/SINOTRUK standards. 1000-hour extreme bench test, performs like originals in harsh environments.

②Inspection Items: Dynamic balance, vacuum leak detection, boost stability, high-temp endurance, oil pressure, rotor flexibility and appearance checks.

③Quality System: IATF16949/ISO9001 certified. Full-process control from raw materials to delivery ensures batch consistency.

④Batch Tracking: Laser-engraved OE number, batch code and production date. 3+ years of records for traceability and quick troubleshooting.

①Average Service Life: ≥3 years or 300,000km, matching heavy-duty engine maintenance cycles.

②Performance Advantages: Titanium impeller (15% less turbo lag). Ceramic coating (reduced heat loss). Precision bearings (low noise, long life). Optimized airflow (stable boost).

③Harsh Environment Adaptability: -40℃ cold startup, 850℃ heat resistance. Resists mining dust and plateau pressure, stable boost in extremes.

Common Fault Optimization

Common Fault Optimization: Fixes impeller wear, housing deformation, oil leakage, unstable boost and bearing failure. Upgraded materials and precision machining reduce faults, avoiding engine power loss.

Maintenance & Replacement Value

Maintenance & Replacement Value: Direct in-situ replacement, cutting maintenance time by 50%. Fully compatible with original systems, no adapters/ECU debugging. Stable boost ensures power and fuel economy, reducing downtime.

Packaging Configuration

Packaging Configuration: Four-layer protection (foam + EVA + corrugated carton + wooden frame). Positioning brackets prevent vibration. Ports sealed with plastic plugs. Accessories (gaskets, bolts, sealant) individually packaged.

Marking Specifications

Outer Carton Marking: OE number, product name, applicable vehicles, quantity, batch, weight, warning signs and multilingual (English/Spanish/Arabic) instructions for export.

Product Marking: Laser-engraved OE number, boost pressure, production date/batch on turbine housing (high-temp/oil-resistant).

Customization Service: Neutral packaging available. Custom LOGO packaging and adjustable carton printing/marketing languages for export/domestic needs.

①Inventory Status: Sufficient stock for regular specs (Shaanxi/SINOTRUK models), supporting immediate spot delivery.

②MOQ: 5 units. Tiered bulk discounts, customizable production cycles for large orders.

③Delivery Cycle: Spot orders shipped in 24-48hrs, bulk orders in 7-10 days. Foreign trade support: customs clearance and full export documents.

④Supply Stability: Monthly output ≥8,000 units. Independent lines/molds/supply chains ensure stable bulk supply.

①Certification: IATF16949/ISO9001 certified. Third-party test reports available on request.

②Warranty: 18 months. Free 7-day return/exchange and replacement for non-human faults (unstable boost, oil leakage, etc.).

③Technical Support: 24-hour online service. Engineers provide installation, oil selection and boost fault diagnosis guidance.

④Return Policy: We cover non-human fault freight. Free replacement for transport-damaged products.

Q1: Compatible with WD615/WD618 engines?

A1: Fully compatible. Provide engine model/exhaust specs for modified manifolds.

Q2: Installation/use precautions?

A2: Clean oil circuit/air filter before installation. Use CD 15W-40 oil, replace filter regularly. Idle 3-5 mins before shutdown to cool bearings.

Q3: Multilingual docs for export?

A3: Yes (English/Spanish/Russian/Arabic). Full technical and customs clearance documents provided.

Q4: Boost insufficiency during warranty?

A4: Provide fault photos, batch number and test data. We send replacement and cover round-trip freight.

Installation Requirements

Installation Requirements: Check housing/flange integrity. Clean oil circuit, manifolds and pipelines. Fit gaskets, apply high-temp sealant. Fasten oil pipes. Rotate rotor to check for jamming.

Regular Inspection

Regular Inspection: Check for leaks every 10,000km. Clean air filter, replace oil/filter every 20,000km. Test rotor flexibility and boost (0.7-0.9MPa) every 50,000km.

Storage Requirements

Storage Requirements: Store in dry/ventilated warehouse, horizontal placement. Seal ports. 1-year shelf life for unopened units; check rotor flexibility before installation if stored longer.

Replacement Tips

Replacement Tips: Replace for weak power, high fuel consumption, abnormal smoke/noise or oil leakage. Replace oil pipes, gaskets and air filter simultaneously.

Hot Tags: 1000714569 turbocharger, China 1000714569 turbocharger manufacturers, suppliers, factory, 612600080674, DZ 612600130390, 1000714569 Turbocharger, 1005544823 Cylinder Head, 6126000900039 Cylinder Block Assembly, 1000802949Cylinder Block