Product Description
The DZ9114598319 F3000 Right Front Engine Mount with Bracket is key for F3000 heavy trucks. It connects the engine's right front to the frame, soaking up vibration and noise from the engine. It also holds the engine in place to stop too much movement. This keeps power flowing steady between engine and gearbox, and cuts wear on parts from shaking.
Good materials go into it: 8mm high-strength steel bracket (extra welding at stress points), high-density natural rubber block (Shore 65±5) with anti-aging additives. Rubber and bracket are bonded with high-temp vulcanization-no peeling. Handles engine vibration (10-800Hz), 120℃ heat, heavy load bumps-no bracket cracks, rubber hardening, or bond failure. Fits F3000's original engine/frame: same holes, bracket size, rubber shape. Swap easy-no frame/engine mods, take old bolts off, install new, tighten to 350-400N·m. Tested before shipping: 5000N load, 1 million vibrations, high temps-trustworthy.
Features And Advantages
Great vibration absorption: Rubber block soaks up 60-70% of engine shake. Less vibration to cab/frame, cab quieter (5-8dB), less wear on bolts/pipes.
Strong load capacity: Reinforced steel + vulcanized bond holds up to 800kg. No bracket bend or rubber peel, even in tough conditions.
Fits F3000 exactly: Same as original-hole spacing, bracket angle, rubber compression. No shims/drilling, saves time, correct engine position.
Long-lasting: Anti-aging rubber + tough steel. Lasts 300k+ km-30% longer than regular mounts.
Application Scope
Only F3000 heavy trucks: tractors, dump trucks, cargo trucks with WP10/WP12 engines. No F2000, X3000, or FAW/Dongfeng-different engine/frame/mount sizes, won't fit.
Basic Parameters
Product Model: DZ9114598319
Applicable vehicles: F3000 series (with WP10/WP12 engines)
Function: Holds engine right front, absorbs vibration, reduces noise, stops excess movement
Material: 8mm steel bracket; high-density natural rubber block (anti-aging)
Installation: Direct replacement (matches original holes), torque 350-400N·m
Working conditions: ≤800kg; -40℃~120℃; 10-800Hz vibration; ≥300k km life
FAQ
Q1: Works on F3000 WP13 engines?
A1: No-WP13 is heavier, different mounts. This won't fit or hold.
Q2: Engine vibrates weird after install?
A2: Check bolts are tight to 350-400N·m. If yes, make sure mount's facing right. Still bad? Replace mount.
Q3: How often to check?A3: Every 20k km or 6 months. Check for cracks, rubber issues, loose bolts-replace if needed.
Q4: Replace left mount too?A4: Not needed, but if left is over 200k km, replace both for even shock absorption.
Hot Tags: dz9114598319 right front engine mount, China dz9114598319 right front engine mount manufacturers, suppliers, factory
