DZ9X189822051 Electric Cabin Lifting Pump

DZ9X189822051 Electric Cabin Lifting Pump

The DZ9X189822051 is an electric cabin lifting pump designed for heavy-duty vehicles such as trucks and engineering machinery, reliable power, and leak-proof design. Built with a high-strength cast iron pump body and wear-resistant stainless steel piston, it withstands harsh conditions including long-term vibration, dust, and temperature fluctuations from -25℃ to 50℃, while its working principle converts electrical energy into hydraulic pressure to smoothly lift or lower the cab. Fully compatible with original hydraulic interfaces and mounting positions of mainstream truck models like Sinotruk and Foton, it installs directly without additional modifications. Each unit undergoes three rigorous factory tests—including a 1-hour continuous load test and 24-hour leak-proof test—ensuring durability, safety, and reliable operation.
Send Inquiry
Description
Technical Parameters

Product Details:

 

Product Model: DZ9X189822051

Fits Vehicles: Heavy-duty trucks, construction machines (with hydraulic cab lifting systems)

Function: Gives hydraulic power to lift/lower the cab, making engine, transmission, and chassis repairs easy.

Materials: Pump body (strong cast iron); inner piston (304 stainless steel); motor shell (aluminum alloy); seals (nitrile rubber, oil-resistant and anti-aging).

Installation: Direct replacement-fits original oil pipes, power plug, and mounting brackets.

Operating Conditions:

Voltage: 12V DC / 24V DC (choose one; check product label)

Temp Range: -25℃ to 50℃

Max Lifting Load: 800kg

Hydraulic Oil Type: ISO VG 46 anti-wear hydraulic oil

Protection Level: IP54 (keeps out dust and splashed water)

 

23

 

46

The DZ9X189822051 is an electric pump for lifting heavy-duty vehicle cabs-like big trucks and construction machines. It works well: lifts steadily, never shuts off suddenly, and no hydraulic oil leaks. It's made of strong cast iron (pump body) and tough stainless steel (inner piston). Hard conditions-shaking on construction sites, dust from road work, or temps between -25℃ and 50℃-won't break it. It turns electricity into hydraulic pressure to move the cab up/down smoothly. It fits the original hydraulic ports and mounting spots on most big trucks (Sinotruk, Foton). To install, just disconnect the old pump's oil pipes and power cord, then put this one on directly-no need to modify the vehicle.

 

Features And Advantages:

 

① Steady lifting: It has a powerful DC motor inside that gives consistent pressure. So the cab goes up/down at 5-8 cm per second, no shaking-even if there's extra stuff like toolboxes or spare parts on the cab.

② Long-lasting: The cast iron body can take hits and won't bend. The stainless steel piston doesn't wear out easily from hydraulic oil. It can lift over 5,000 times without losing performance-twice as long as cheap plastic pumps.

③ Easy to install: Matches the original truck's oil pipe ports (standard G1/2 threads) and power plug (choose 12V or 24V, fits most big trucks). Mounting holes line up with the old pump's brackets. Two workers can swap it in 30-45 minutes-saves half the time of a mismatched pump.

④ Safe to use: Two safety features. If the load is over 800kg, it shuts off power automatically. If hydraulic oil is low, it warns the truck's dashboard. These stop the pump or cab from getting damaged.

 

Application   :              

 

This DZ9X189822051 electric cabin tilt pump fits Shacman Delong series (X3000, X5000, X6000, M3000, F3000).

It's a solid match for tractors, dump trucks, mixers, and other heavy-duty commercial vehicles.

Whether it's long-haul freight, mountain routes, or tough jobsites and mining areas, it handles the daily cab lifting reliably.

Built to last, this pump is a proven seller in markets like Russia, Central Asia, Africa, and Southeast Asia, widely trusted by fleet managers, repair shops, and parts distributors.

 

FAQs :

 

Q1: Can I use this on a small truck (like Foton Tunland)?

A1: No. Small trucks use low-pressure lifting systems (max load ≤ 300kg). This pump is for heavy vehicles-using it could break the cab's lifting arms.

 

Q2: Why does the pump make weird noises?

A2: First, check oil level (look through the pump's oil sight glass). Low oil lets air in, causing noise. If oil is okay, tighten loose oil pipe joints with a wrench .

 

Q3: How often to maintain?

A3:   Change oil filter every 12 months or 10,000 km (whichever first)-stops clogging.

         Check oil pipe seals every 3 months. Replace if cracked or leaking.

        Clean motor air vents every 6 months-stops overheating.

 

Q4: What tools do I need to install?

A4: Basic tools: 14-17mm wrench (oil pipes), 10mm socket wrench (mounting bolts), torque wrench. Have techs who know heavy-duty vehicle hydraulics do it-avoids breaking parts.

 

Why choose us?

 

Zoya Auto Parts: Your one-stop solution for all parts needs.

Zoya Auto Parts is your most loyal partner, ensuring quality through every challenge.

Zoya Auto Parts: Equipping your trucks with reliable armor for unmatched road performance.

Zoya Auto Parts: Building a large, inclusive company for everyone.

 

Hot Tags: dz9x189822051 electric cabin lifting pump, China dz9x189822051 electric cabin lifting pump manufacturers, suppliers, factory, DZ93259535308 Inlet Intercooler Pipe, howo cab spare parts