81.26430.0116 F2000/F3000 Wiper Arm

81.26430.0116 Wiper Arm is for F2000/F3000 trucks. It connects the wiper motor and blade, sends power to the blade to wipe the windshield, gets rid of rain, snow, and dust so the driver sees clearly.

We use good materials: galvanized steel arm (no rust from rain/salt), chrome-plated shaft (wears little, turns smoothly), tough plastic clip (holds blade tight). It handles -40℃ to 80℃, lots of wipes, and bumpy roads. Hardly bends, sticks, or breaks-lasts long. Fits original wipers perfectly: M8×1.25 hole, 520mm long, swings 90°. Swap right in-no need to change motor or windshield frame. Tested before shipping, meets F2000/F3000 standards.

Strong, won't bend: Galvanized steel takes blade pressure without bending. Even if the blade freezes, the arm won't break-no sudden wiper failure.

No rust, lasts long: Galvanized surface resists rust for over 3 years. Chrome shaft is hard, no wear or sticking-swings smoothly.

Fits F2000/F3000 right: Same as original-mounting, length, swing. No extra parts: line up the hole, tighten the bolt, put on the blade.

Easy to install and care for: Simple structure, clip snaps on. Basic truck fix know-how works-15-20 minutes to swap. Daily care: check bolt tight, wipe arm clean.

Only for F2000 (4×2, 6×4) and F3000 (6×2, 8×4) trucks. Won't work on F1000, A7, Howo T5G-different motor shafts, windshield shapes, arm lengths.

- Product Model: 81.26430.0116

- Fits trucks: F2000 series (4×2, 6×4), F3000 series (6×2, 8×4)

- Type: Windshield Wiper Arm (single)

- Function: Sends motor power to the blade, drives wiping

- Material: Arm (galvanized steel); shaft (chrome-plated steel); clip (engineering plastic)

- Installation: Direct replacement (matches M8×1.25 hole, 520mm length)

- Working conditions: 520mm length; 90° swing; -40℃~80℃; 0.8-1.2N load; resists 10-500Hz vibration

Q1: Works on F1000?

A1: No, only F2000/F3000. F1000 has a smaller shaft, shorter arm-won't fit.

Q2: Swings unevenly after install?

A2: Check if the bolt's tight. If yes, make sure blades's on the right. Still off? Check the wiper motor angle.

Q3: How to make it last longer?

A3: Wipe arm monthly, check bolt every 10,000 km, replace blade when worn.

Hot Tags: 81.26430.0116 f2000/f3000 wiper arm, China 81.26430.0116 f2000/f3000 wiper arm manufacturers, suppliers, factory